|
Product Number: MCS109950
The 1099-50 is an auto sensing Multi-Code or Stanley compatible format gate receiver.
It eliminates any chance of damage to either the gate operator or itself from running off the wrong voltage. Nearly all gate orperators offer either 24 or 12 volts AC or DC as accessory power. Because
this receiver is auto sensing, it recognizes the gate operator's correct voltage. As a result, installers can be assured of always having the correct model gate receiver on the truck.
The receiver can operate from 12-30 volts AC or 10.5-30 volts DC and is normally powered from the gate operator.
Its relay contact(s) are rated at 30 VAC/DC up to 5 Amps.
The 1099-50 receiver supports transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format. Both formats support 1,024 system codes for the MCS109950 and 512 system codes for the MC302850 (system codes are easy to set via dip switches).
The 1099-50 has a single relay and replaces three different Multi-Code gate receivers, the MCS109930, the MCS109940, and the MCS109931. It is designed for use with automatic gate operators or systems where a remote antenna is needed.
Features:
- 12 or 24 Volt AC or 10.5 to 30 Volts DC 300 or 310 MHz frequency, gate opener or garage door opener receiver.
- 10 dip switches, single channel, will operate one device.
- Works with MultiCode 300 MHz remotes or Stanley 310 MHz remotes, but not both at the same time.
- 300 or 310 MHz jumper-selectable frequency adjustment.
- 4 36" 22AWG wires on removable connectors for easy installation, easy to follow instructions included.
- Power: red and black wires.
- CH1 Relay: 2 gray wires.
- Coaxial antenna for longer range and perfect for use with gate openers with metal covers.
- Replaces the 1099-30 or 1090CX.
- Includes 9.5" local whip antenna, 3 ft. of 75 ohm coaxial cable, bulkhead connector, mounting hardware.
|
Close
